Official distributor of
Europe GmbH for ferrites in Europe
FP Series Noise-suppressing Ferrite Plates
FP series noise suppressing ferrite plates are intended to attenuate electromagnetic noises and to provide electromagnetic compatibility of micro-processors. FR series ferrite plates are installed on micro-processor over layer of non-conductive self-gluing tape.
FP series plates may be used to provide an electromagnetic compatibility and to prevent a resonance of two micro-processors and also to attenuate an emission of data transmission link’s flat cables.
Nomenclature List of FP series Plates
| Order code | Typical Impedance (Ohms) | Figure | |
|---|---|---|---|
| Width x Legth x Thickness (mm) | 25MHz | 100MHz | |
| FP 10x10x1.0-G | 18 | 78 | Fig. 1 |
| FP20x20x 1.5-G | 31 | 140 | Fig. 1 |
| FP23x23x 1.5-G | 36 | 171 | Fig. 1 |
| FP28x28x0.5-G | 40 | 171 | Fig. 2 |
| FP30x30x1.5-G | 48 | 234 | Fig. 2 |
Possible Uses of FP Series Ferrite Plates
Impedance vs Frequency Dependency
Impedance vs frequency dependency for FP series ferrite plates:
Added to cart